The easiest 7 steps to install wallpaper at home by yourself
The easiest 7 steps to install wallpaper at home by yourself
The easiest 7 steps to install wallpaper at home by yourself, people care about the interior appearance of their homes a lot, because it is the place in which they live, and in which they must find comfort and pleasure, so they are keen to pay attention to the smallest details, and resort to various modern decoration ideas that agree with what they desire.
One of these ideas is wallpaper, which is ready-made papers in several shapes and drawings, with multiple bright colors, to suit different tastes. And in this article, the easiest 7 steps to install wallpaper at home by yourself and stick it in a professional technical way will be explained, so that it eliminates the need for an expert in this field. You will find that the method of installing wallpaper is very easy, and you only need patience and deliberation during its installation.
https://bybnews.com/the-easiest-7-steps-to-install-wallpaper-at-home-by-yourself/
Necessary tools and materials
Table of Contents
• Enough wallpaper for the walls you want to stick it on.
• peace.
• Sharp scalpel (a sharp knife).
• An iron ruler.
• paint brush.
• A bristle brush or a round wooden pole.
• Paper sticker.
• Sandpaper.
• Water balance (equatorial balance).
• sponge.
• A dry cloth.
The easiest 7 steps to install wallpaper at home by yourself
1- Choose the right wallpaper
First of all, you must calculate the appropriate quantity needed to purchase wallpaper according to the place where you want to stick it, then calculate the length and width of the wall to calculate the required area (area = length x width), calculate the area of ​​each wall separately, and then add the areas with each other. Be sure to purchase an additional amount of space.
After that, you must choose the type and shape of wallpaper according to what you want and what suits the room in which you want to stick it. There are two types of wallpaper; Wallpaper is ready to stick directly and without the need to use an adhesive (and this is the easiest type), and another type of paper needs to apply an adhesive before installing it on the walls.
2- Preparing the wall for the installation process
Before starting the wallpaper installation process, the wall must be ready, clean and free from defects or obstructions. If there are voids or cracks, they must be treated initially, and if there is mold or moisture, they must also be treated and repaired. It is preferable to drill the wall to remove the protrusions and protrusions in the wall.
Also, it is preferable that you remove and unscrew the covers of electrical boxes (plugs and switches), in order to ensure the passage of wallpaper in the hidden corners.
Make sure to cover the visible electrical parts well with a paper tape, and it is preferable to isolate the electricity in the room because of the possibility of water reaching the eaves during the installation of the wallpaper.
3- Preparing the first paper
Take the time to install the first piece, as it is the basis on which the rest of the wallpaper pieces will be built!
The first step in installing the paper is to measure the length of the wall on which the first piece is to be installed, and then cut the wallpaper along the wall to be installed on it, with the need to increase 10 cm in the length of the paper, so that the upper corner is covered by 5 cm, and the lower corner by 5 cm of paper, to ensure that the paper covers all edges.
Be 100% sure of the spacing, and that the line is 100% vertical, it’s best to try the first piece and put it in place without using the tape or opening it. The space of the paper should go beyond the sides of the top, bottom and side wall (perpendicular to the other wall), the excess will be cut later so don’t worry.
4- Install the first sheet
After you are sure of all this, apply the adhesive to the walls with a brush (or read the instructions written on the adhesive and wallpaper), or if the paper is self-adhesive, it is enough to open the paper from the sticky side, and then apply the first piece starting from the Top of the ceiling (using a ladder). Make sure the tip of the paper matches the vertical line drawn.
Little by little, apply pressure to the applied part with a bristle brush or a round wooden pole to apply pressure to the paper, removing any bubbles that may appear during installation. Continue in this way until you reach the bottom of the wall, and repeat the process of pressing again in the same direction (from top to bottom).
5- Install the rest of the papers
Continue in this way to install the rest of the paper pieces, taking the first paper as a reference to make the rest of the papers 100% straight and vertical, in case there are small obstacles in the way of installation such as holes for the grooves, then complete attaching the papers, to later make slots to remove the part that covers these slots .
In the event that the obstacles are large, such as the presence of a window or a door, before installing the paper, the appropriate length must be measured from the bottom of the window and from above (or the top of the door), with the need to calculate an additional 5 cm length.
6- Remove appendages
Extensions of adhesive will appear on the edges of the first sheet, using a damp sponge, wipe it carefully, and then dry it with a dry cloth.
Also, there will be excess edges of paper, remove it using a sharp knife (a sharp scalpel), be careful while cutting these excesses, so as not to scratch the wall, and not to cut the paper in the wrong way or not straight, you can use an iron ruler to ensure this. Also remove the excess and make holes in the paper for the grooves and small obstacles that appeared with you during the installation process.
7- Leave it to dry
Allow the wallpaper to dry for at least 30 minutes, and then enjoy the new wallpaper. It is preferable not to use water when wallpapering for a period of at least 24 hours to ensure that the adhesive dries up.
You must be logged in to post a comment.